Nothing is more annoying than finding your car won’t start on a cold winter morning. The first source of help in such a situation is to find someone who can jump start your car with a good battery. Most people are not aware that this procedure can be very hazardous unless done properly.
Every year hundreds of injuries result from batteries that explode while being jump started. The reason they explode is that in the cranking procedure of starting the car, the battery produces a lot of hydrogen gas as a by-product of the chemical reaction that generates the electricity. An explosion will result from any spark caused by improperly attaching the cables to the battery.
An exploding car battery is like a bomb that sprays chunks of plastic casing and sulfuric acid towards anyone nearby. The most vulnerable part of your body in such accidents is your eyes, which can sustain lacerations and acid burns resulting in loss of eyesight. In the case of such an injury, you should immediately wash your eyes under running water for at least 15 minutes, and then seek immediate medical attention at the nearest emergency room or ophthalmologist.
The proper way to jump start your car does not cause any sparks around the dead battery, and will minimize the risk of explosion. It might be a good idea to clip this posting and keep it in your glove compartment where it may come in handy one cold winter morning.
How to jump start your car properly:
Before you begin:
- Make sure your cables are color coded enabling you to identify both ends of the cable.
- Wear eye protection and do not lean over the battery.
- Be sure the vent caps are tight on the battery.
- Be sure both batteries are the same voltage.
- Be sure both cars are not touching each other and the parking brakes are on.
Then follow this sequence:
1. Attach the red cable to the positive (+) terminal of the dead battery. The metal part of the cable may not touch the other cable or anything else metal.
2. Attach the other end of the red cable to the positive (+) terminal of the good battery.
3. Attach one end of the black cable to the negative (-) terminal of the good battery.
4. Attach the other end of the black cable to any metal part of the disabled car. Do not attach this cable to the negative (-) terminal of the dead battery or any part of the carburetor line.
5. Start the “good” car, run for several minutes, then start the disabled car. Stay away from the engine compartment as the cars are started.
6. Once the disabled car is started, remove the cables in reverse order. Do not allow any clamp to touch any metal while the other end remains attached.
7. Run or drive the disabled car for at least 15 to 30 minutes before shutting off. This should charge the battery enough so the car will start the next time.
Remember, during the holiday season, please be safe, and have a happy holiday!!
The information presented on this Site and Blog and any related links is provided for educational, informational, and entertainment purposes only. Nothing contained in this Site is intended to create a physician-patient relationship, to replace the services of a licensed, trained physician or health professional or to be a substitute for medical advice of a physician or trained health professional licensed in your state. You must never consider any of the information presented here as a substitute for consulting with your physician or health care provider for any medical conditions or concerns. Any information presented here is general information, is not medical advice, nor is it intended as advice for your personal situation. Please consult with your physician or health care provider if you have concerns about your health or suspect that you might have a problem.